Earth Science Frontiers ›› 2021, Vol. 28 ›› Issue (5): 114-124.DOI: 10.13745/j.esf.sf.2021.2.4

Previous Articles     Next Articles

Complex resistivity properties and spectral parameters of TCE contaminated soils

ZHANG Zhenyu1(), XU Weiwei2, DENG Yaping3, REN Jinghua2, SHI Xiaoqing1,*(), WU Jichun1   

  1. 1. Ministry of Education Key Laboratory of Surficial Geochemistry, School of Earth Sciences and Engineering, Nanjing University, Nanjing 210023, China
    2. Ministry of Natural Resources Technical Innovation Center of Ecological Monitoring Restoration Project on Arable Land, Geological Survey of Jiangsu Province, Nanjing 210018, China
    3. School of Resources and Environmental Engineering, Hefei University of Technology, Hefei 230009, China
  • Received:2020-05-20 Revised:2021-08-19 Online:2021-09-25 Published:2021-10-29
  • Contact: SHI Xiaoqing

Abstract:

The complex resistivity has become a promising contaminant monitoring tool due to its sensitivity to pore water chemical properties, solid-liquid interface and fluid content. In this study, we chose trichloroethylene (TCE) as a typical organic contaminant and measured the complex resistivity of TCE contaminated soils by SIP method. We studied the effects of pore water salinity, water saturation and soil types on the complex resistivity characteristics and spectral parameters of TCE-contaminated soils. Results show that the complex resistivity of contaminated soil samples increases with decreasing water saturation and pore water salinity. The clay content affects the continuity of pore water. When the pore water is discontinuous, the real and imaginary parts change greatly. The total chargeability (M) increases with decreasing pore water salinity and decreases at first and then increases with decreasing water saturation. M is also reduced by decreasing specific surface area caused by the rearrangement of clay particles and increased by double layer polarization. The mean relaxation time decreases with increasing pore water salinity as shown by a logarithmic correlation. The main reason for the variation of M with water saturation is the change of polarizable pore size. This study establishes a relationship between geophysical and hydrogeological parameters, thus providing a theoretical basis for SIP field measurements.

Key words: complex resistivity, induced polarization, trichloroethylene, Debye model, spectral parameters

CLC Number: